Instructions for the installer
30
It is possible to connect the gas in the following ways:
•
using iron or copper
rigid pipe
;
•
using
uninterrupted
stainless steel
flexible pipe
with a mechanical fitting conforming to
standards regulations in force (maximum length of extended pipe
2000 mm
). The pipe should
be connected straight to the elbow of the ramp;
•
by inserting a
flexible rubber pipe
conforming to standards regulations in force. This pipe
should be coupled straight to the rubber-holder
P
corresponding to the gas used, and locked
with a clamp
F
conforming to standards regulations in force. In the latter case, check the expiry
date printed on the pipe and replace it before that date.
LPG
NATURAL GAS
Using
flexible rubber pipes
with a max. length of
1500 mm
:
•
do not allow the pipes to be constricted or crushed;
•
pipes must not be subject to tractive force or torsional stress;
•
do not allow the pipes to come into contact with cutting or sharp edges, etc...
•
do not allow the pipes to come into contact with parts that can reach temperatures of
70°C
above room temperature;
•
make sure the entire length of the pipes can be inspected.
The unit must be coated in heat-resistant material (
minimum 90°C
). If the appliance is installed
close to other units, the minimum space suggested in the following diagram must be left.
Summary of Contents for Regina Gastronome QSG1000X
Page 1: ...12 03 ZS2083 ...
Page 36: ...Husqvarna Hushållsprodukter www husqvarna se ...
