Error code
Error message
Possible faults
Possible procedure
F0118
There is a hardware
fault.
N/A.
Speak to your servicing dealer.
F0119
The temperature in the
product is too high.
The product is too hot.
Increase the flow of water coolant. Use
clean water to prevent a blockage in
for specifications for
water flow, temperature and pressure.
F0130
There is a general error. The blade does not move freely.
Stop the product and release the
blade.
Transportation and storage
Transportation of the product
• Make sure that the product is safely attached during
transportation to prevent transport damage and
accidents.
• Always stop the product and disconnect the power
cord before you move the product.
• Always disconnect the power tool and the power tool
cord before transportation.
Storage of the product
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the product in a dry area.
• Make sure that the temperature is not lower than
-25°C (-77°F) and not higher than 50°C (122°F).
Technical data
Technical data
PP 492
Rated voltage
380-480
Max. output, kVA
20
Rated current, A
16/25/32
Input voltage, V/Hz
380-480/50-60
Output voltage, V/Hz
340/0-500
Secondary output voltage, V/Hz
24/0-500
Power supply
3P+PE+N
1- phase outlet, V
230
Recommended cable area, 32A
Length, m/ft
Cable area, mm
2
/AWG
0-30/0-100
6/10
30-60/100-200
10/8
60-100/200-300
16/6
Effect power generator
967 - 001 - 04.02.2020
17
Summary of Contents for PP 492
Page 81: ...967 001 04 02 2020 81 ...
Page 82: ...82 967 001 04 02 2020 ...
Page 83: ...967 001 04 02 2020 83 ...
