3
1
2
4
6
+
-
+
-
5
+
-
SPECIFICATIONS - OPERATION - MAINTENANCE
EN - 37
EN
SHOCK ABSORBER SPRING PRELOAD ADJUSTMENT
Nuda 900
To adjust the spring preload, contact an authorised HUSQ-
VARNA dealer.
Nuda 900 R
- Clean the lock ring nut (1), and adjuster ring nut (2)
on the spring (3).
- Loosen lock ring nut using a hook spanner.
- Turn adjuster ring nut until reaching the desired posi-
tion.
- After having adjusted the suspension based on your
weight and riding style, tighten lock ring nut (tighten-
ing torque 10 Nm; 1.02 Kgm; 7.38 ft-lb).
WARNING*: Be careful not to touch hot
exhaust pipe while adjusting the shock
absorber.
SHOCK ABSORBER HYDRAULIC DAMPING ADJUSTMENT
Nuda 900
It is possible to adjust the rebound travel of the shock
absorber.
B) REBOUND - Standard setting:
- 25 clicks (± 2 clicks)
(adjuster 6)
To reset the standard setting, turn lower adjuster (6)
clockwise until reaching fully closed position. Then turn it
back the number of clicks specified above.
In order to obtain a smooth braking action, turn the ad-
juster counter clockwise. Vice versa to obtain a harder
braking action.
Nuda 900 R
The shock absorber has adjustable hydraulic compression
and rebound damping.
A) COMPRESSION - Standard setting:
- 16 clicks (± 2 clicks)
(adjuster 4)
B) REBOUND - Standard setting:
- 11 clicks (± 2 clicks)
(adjuster 5)
To reset the standard setting, turn the lower adjuster
screw (4) and the upper adjuster screw (5) clockwise
until reaching fully closed position. Then turn it back the
number of clicks specified above.
To turn the adjuster screw (5) remove the right panel
(see “Coolant level check”).
Turn the adjuster screw clockwise to increase compres-
sion damping or counterclockwise to decrease it.
The rear shock absorber can also be adjusted for length;
for this type of adjustment, contact an authorised Husq-
varna dealer.
