1
2
A
B
A
1
2
SPECIFICATIONS - OPERATION - MAINTENANCE
EN - 34
CLUTCH CONTROL LEVER DISTANCE ADJUSTMENT
The lever (1) distance on the handlebar can be adjusted
according to the size of the rider's hand.
To move the lever away from the handgrip, turn the ad-
juster screw (2) CLOCKWISE (A).
To move the lever closer to the handgrip, turn the ad-
juster screw (2) COUNTERCLOCKWISE (B).
CLUTCH FREE PLAY ADJUSTMENT
Free play (A) must be 5 -10 mm (0.196 - 0.39 in).
It can be adjusted by turning and adjuster screw on the
clutch cover.
- Loosen the check nut (1) and adjust play by turning
the threaded pin (2); - after adjustment tighten the nut
(1).
SUSPENSION
The vehicle leaves the factory with standard settings for
the front and rear suspension that meet most require-
ments. If you have special requirements, your dealer can
help you to select the best setting/calibration.
On "NUDA 900" motorcycles, the front fork cannot be ad-
justed whereas the hydraulic rebound on the rear shock
absorber can be adjusted.
On "NUDA 900 R" motorcycles the suspension can be
adjusted according to the type of use and load.
The motorcycle suspension can be adjusted for track use
only (Motard version).
WARNING*:
The Motard version suspension has been
designed exclusively for track use.
Road use is not recommended.
Note
*:
Before making any change and afterwards, if the adjust-
ment is not satisfactory, always start from the standard
suspension setting and increase or decrease the adjusting
clicks, one at a time.
WARNING*:
The various adjustments must be made
on the front fork and the rear shock ab
-
sorber
AS DESCRIBED IN THE FOLLOWING
TABLES
.
