A
1
2
3
4
MAX
MIN
SPECIFICATIONS - OPERATION - MAINTENANCE
EN - 32
CONTROL LEVER DISTANCE ADJUSTMENT AND FRONT BRAKE
FLUID LEVEL CHECK
The lever (1) distance can be set to five different positions ac-
cording to the size of the rider's hand. To move the lever (1)
closer to the handgrip, turn the adjuster screw (2) COUNTER-
CLOCKWISE "A".
The fluid level in the master cylinder tank shall never be
below the minimum level (3) shown on the transparent
reservoir (4).
A decrease in the fluid level will let air into the system
and increase the lever stroke.
WARNING*:
If the brake lever feels mushy when
pulled, there may be air in the brake
lines or the brake may be defective.
Since it is dangerous to operate the mo
-
torcycle under such conditions, have the
brake system immediately checked by
the Husqvarna Dealer.
CAUTION*:
Do not spill brake fluid onto any paint
-
ed surface or lenses (for example lights
lenses).
CAUTION*:
Do not mix two brands of fluid. Com
-
pletely change the brake fluid in the
brake system if you wish to switch to
another fluid brand.
CAUTION*:
Brake fluid may cause irritation. Avoid
contact with skin or eyes. In case of con
-
tact, flush thoroughly with water and call
a doctor if your eyes were exposed.
