background image

12

TO TRANSPORT

• 

Raise attachment lift to highest position with at tach ment 

lift control. 

• 

When pushing or towing your tractor, be sure gearshift 

lever is in neutral position.

•  Do not push or tow tractor at more than five (5) MPH.

NOTE

:  To protect hood from damage when transporting 

your tractor on a truck or a trailer, be sure hood is closed 

and secured to tractor.  Use an appropriate means of tying 

hood to tractor (rope, cord, etc.).

ADD GASOLINE 

•  Fill fuel tank to bottom of filler neck. Do not overfill.  

Use fresh, clean, regular un lead ed gasoline with a 

minimum of 87 octane.  (Use of  leaded gasoline will 

increase carbon and lead oxide deposits and reduce 

valve life).  Do not mix oil with gasoline.  Purchase fuel 

in quan ti ties that can be used within 30 days to assure 

fuel freshness.

CAUTION:  Wipe off any spilled oil or 

fuel.  Do not store, spill or use gasoline 

near an open flame.

IMPORTANT:

  WHEN OPERATING IN TEMPERATURES BELOW 

32°F (0°C), USE FRESH, CLEAN WINTER GRADE GAS O LINE 

TO HELP ENSURE GOOD COLD WEATHER START ING.

TO OPERATE ON HILLS 

WARNING:  Do not drive up or down 

hills with slopes great er than 15° and 

do not drive across any slope.

• 

Choose the slowest speed  before starting up or down 

hills.

•  Avoid stopping or changing speed on hills.
•  If stopping is absolutely necessary, push clutch/brake 

pedal quickly to brake position and engage parking 

brake.

•  Move gearshift  lever to 1st gear.  Be sure you have 

allowed room for tractor to roll slightly as you restart 

movement.

• 

To restart movement, slowly release parking brake and 

clutch/brake pedal.

•  Make all turns slowly.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL 

The engine in your tractor  has been shipped, from the 

factory, already filled with sum mer weight oil.  
•  Check engine oil with tractor on level ground.  
• 

Pull up and remove oil fill cap/dipstick; wipe oil off. Re-

insert the dipstick into the tube and push down firmly 

into place. Remove and read oil level.  If necessary, 

add oil until  “FULL” mark on dipstick is reached.  Do 

not overfill.

•  For cold weather operation you should change oil for 

easier starting (See “OIL VISCOSITY CHART” in the 

Maintenance sec tion of this manual).   

•  To change engine oil, see the Maintenance section in 

this manual.

Fig. 13

TOWING CARTS AND OTHER AT TACH MENTS

Tow only the attachments that are recommended by and 

comply with specifications of the manufacturer of your trac-

tor. Use common sense when towing. Too heavy of a load, 

while on a slope, is dangerous. Tires can lose traction with 

the ground and cause you to lose control of your tractor.

CAUTION:  Alcohol blended fuels (called gas-

 o hol or using ethanol or methanol) can attract 

moisture which leads to sep a ra tion and for-

 ma tion of acids during storage.  Acidic gas can 

damage the fuel system of an engine while in 

storage.  To avoid engine problems, the fuel 

system should be emptied before stor age of 

30 days or longer.  Drain the gas tank, start 

the engine and let it run until the fuel lines 

and carburetor are empty.  Use fresh fuel next 

sea son.  See Storage In struc tions for additional 

information.  Never use engine or carburetor 

cleaner products in the fuel tank or permanent 

damage may occur.

CAUTION:  Do not operate the mower 

without either the en tire grass catcher, on 

mowers so equipped, or the deflector shield 

(S) in place (See Fig. 13).

TO STOP MOWER BLADES

Disengage at tach ment clutch con trol.

SERVICE REMINDER/HOUR METER

Service reminder shows the total number of hours the engine 

has run and flashes to indicate that the engine or mower 

needs servicing. When service is required, the service 

reminder will flash for two hours. To service engine and 

mower, see the Maintenance section of this manual.

NOTE

: Service reminder runs when the ignition key is in 

any position but "STOP". For accurate reading, be sure key 

remains in the "STOP" position when engine is not running. 

S

OPERATION

Summary of Contents for LT19538





























Reviews: