116 – English
MAINTENANCE
General
•
Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.
Maintenance schedule
In the maintenance schedule you can see which parts of your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending
on the rate of usage.
*See instructions in the section "Machine’s safety equipment".
** See instructions in the section "Cutting blades" and "Assembly and settings".
!
WARNING! The user must only carry out the maintenance and service work described in this
Operator's Manual. More extensive work must be carried out by an authorized service workshop.
The engine should be switched off, and the stop switch in STOP position.
Wear personal protective equipment. See under heading ”Personal protective equipment”.
The life span of the machine can be reduced and the risk of accidents can increase if machine
maintenance is not carried out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact your nearest service workshop.
Daily maintenance
Weekly maintenance
Monthly maintenance
Cleaning
Cleaning
Cleaning
External cleaning
Spark plug
Cooling air intake
Fuel tank
Functional inspection
Functional inspection
Functional inspection
General inspection
Vibration damping system*
Fuel system
Throttle lockout*
Muffler*
Air filter
Stop switch*
Drive belt
Drive gear, clutch
Blade guard*
Carburettor
Cutting blade**
Starter housing
Summary of Contents for K970 II Rescue
Page 123: ......
