12 SERVICE WORK ON THE CHASSIS
58
M00434-10
(FE US)
–
Remove screws
of connecting cap
.
–
Remove the connecting cap with the perforated pipe, O-ring
, and glass
fiber yarn filling
.
–
Remove screws
and silencer cap
with O-ring
.
–
Remove screws
and insert
together with insulating pad
.
–
Remove the insulating pad from the insert.
–
Clean the parts that need to be reinstalled and check for damage.
–
Mount the new insulating pad on the insert and fasten with adhesive tape.
–
Position the insert with the insulating pad in outer tube
.
–
Mount and tighten screws
.
Guideline
Screws on the main silencer
M5
7 Nm (5.2 lbf ft)
–
Mount O-ring
on the silencer cap.
–
Mount new glass fiber yarn filling on the perforated pipe.
–
Mount the connecting cap with the glass fiber yarn filling in the outer tube.
Info
Press the glass fiber yarn filling into the outer tube using a blunt tool.
–
Mount and tighten screws
.
Guideline
Screws on the main silencer
M5
7 Nm (5.2 lbf ft)
–
Mount O-ring
on the silencer cap.
–
Position the silencer cap with O-ring
in the outer tube.
–
Mount and tighten screws
.
Guideline
Screws on the main silencer
M5
7 Nm (5.2 lbf ft)
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
12.32
Removing the right side cover
S00902-10
–
Remove screw
.
–
Pull off the side cover in area
sideways and remove it toward the rear.
12.33
Installing the right side cover
S00902-10
–
Position the side cover and engage in area
.
–
Mount and tighten screw
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
Summary of Contents for FE 450 2016
Page 1: ...OWNER S MANUAL 2016 FE 450 FE 501 Art no 3402066en ...
Page 2: ......
