Husqvarna FE 450 2016, Owner'S Manual

Page: 89 / 123

15 ELECTRICAL SYSTEM
87
S00894-10
–
Position brake line  and wiring harness  in the brake line guide.
Finishing work
–
Check the headlight setting. ( p. 88)
15.8 Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. ( p. 85)
S00507-10
Main work
(FE EU/AU)
–
Turn protection cap  together with the underlying bulb socket counter-
clockwise all the way and remove it.
–
Pull bulb socket

of the parking light out of the reflector.
M00433-10
(FE US)
–
Turn protection cap

together with the underlying bulb socket counter-
clockwise all the way and remove it.
–
Pull bulb socket

of the parking light out of the reflector.
S00508-10
–
Pull out headlight bulb

.
–
Insert the new headlight bulb.
Headlight (HS1 / Sockel PX43t) ( p. 110)
–
Insert the protection cap with the bulb socket into the reflector and turn it clock-
wise all the way.
–
Ensure that O-ring

is seated properly.
–
Insert the bulb socket of the parking light into the reflector.
Finishing work
–
Install the headlight mask with the headlight. ( p. 86)
–
Check the headlight setting. ( p. 88)