Husqvarna FC 250, Owner'S Manual, Page: 94 / 149

12 BRAKE SYSTEM
92
F00085-10
–
Add brake fluid to level A .
Brake fluid DOT 4 ( p. 137)
–
Mount and tighten screw cap
1
with membrane
2
and
the O-ring.
Info
Clean up overflowed or spilled brake fluid immedi-
ately with water.
H02367-10
(Option: Magura)
–
Stand the vehicle upright.
–
Remove the cable ties on the frame protector.
–
Remove screw cap
1
with membrane
2
and the shim.
H02368-11
–
Manually press the brake caliper to the brake disc to push
back the brake piston. Ensure that brake fluid does not
flow out of the brake fluid reservoir, extracting it by suc-
tion if it does.
Info
Make sure when pushing back the brake piston
that you do not press the brake caliper against the
spokes.
–
Remove cotter pin
3
.
–
Push leaf spring
4
downwards and remove pin
5
.
–
Remove brake linings.
–
Clean the brake caliper and brake caliper support.
H02369-10
–
Check that leaf spring
4
in the brake caliper and sliding
plate
6
in the brake caliper support are seated correctly.
H02370-10
–
Insert the new brake linings.
–
Mount pin
5
.
Leaf spring
4
engages in the groove on the pin.
Info
Always change the brake linings in pairs.
Make sure that decoupling plate
7
is mounted
on the piston side brake lining.
–
Mount cotter pins
3
.