Husqvarna F2401V5, Owner'S Manual

Page: 73 / 152

SERVICE WORK ON THE CHASSIS 11
71
V01590-11
–
Plug in connector
3
for the fuel pump.
–
Remove the wash cap set and thoroughly clean the quick
release coupling using compressed air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray ( p. 142)
–
Join quick release coupling
4
.
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
Finishing work
–
Install the right side cover. ( p. 68)
–
Mount the seat. ( p. 63)
–
Install the air filter box cover. ( p. 63)
11.34 Checking the chain for dirt
400678-01
–
Check the chain for heavy soiling.
» If the chain is very dirty:
–
Clean the chain. ( p. 71)
11.35 Cleaning the chain
Warning
Danger of accidents Lubricants on the tires reduces the road grip.
–
Remove lubricants from the tires using a suitable cleaning agent.
Warning
Danger of accidents
Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Note
Environmental hazard
Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.