Husqvarna F2303R0, Repair Manual

Page: 255 / 333

-
Check clutch throw-out
0
for damage and wear.
If there is damage or wear:
Change the clutch push rod.
Place the clutch push rod
(D
on a flat surface and check for run-out.
If there is run-out:
Change the clutch push rod.
-
Check the contact surface of clutch pressure cap
C,
for damage and wear.
If there is damage or wear:
Change the clutch pressure cap.
-
Check outer pretension ring
48
for damage and wear.
If there is damage or wear:
Change outer pretension ring.
-
Check outer spring washer Ci) for damage and wear.
If there is damage or wear:
Change outer spring washer.
-
Check inner pretension ring
4D
for damage and wear.
If there is damage or wear:
Change inner pretension ring.
-
Check inner spring washer Qi) for damage and wear.
If there is damage or wear:
Change inner spring washer.
-
Check release ring G) for damage and wear.
If there is damage or wear:
Change release ring.
-
Check sleeves @ for damage and wear.
If there is damage or wear:
Change the sleeves.
-
Check clutch center @!) for damage and wear.
If there is damage or wear:
Change the clutch center.
CLUTCH 18
D04619-11
253