Husqvarna F2303R0, Repair Manual

Page: 227 / 333

17.4.46 Checking the starter drive
-8
"
0-•
310086-10
-
Check the gear mesh and bearing of starter idler gear
O
for damage and wear.
If there is damage or wear:
Change the starter idler gear.
-
Check the gear mesh and bearing of torque limiter @ for damage and wear.
If there is damage or wear:
Change the torque limiter.
-
Check the gear mesh and bearing of freewheel gear
(D
for damage and wear.
If there is damage or wear:
Change the freewheel gear or bearing.
-
Check freewheel
C,
for damage and wear when it is disassembled.
If there is damage or wear:
Change the freewheel.
-
Check the gear mesh of starter motor
0
for damage and wear.
If there is damage or wear:
Change the starter motor.
-
Change the O-ring (3 of the starter motor.
ENGINE 17
-
Connect the negative cable of a 12 volt power supply to the housing of the starter motor. Connect the posi-
tive cable of the power supply briefly with connector of the starter motor.
If the starter motor does not turn when the circuit is closed:
Change the starter motor.
...
225