Husqvarna F2201U1, Owner'S Manual

Page: 72 / 163

11 SERVICE WORK ON THE CHASSIS
70
S02309-10
Main work
–
Remove all the screws on the silencer cap.
–
Take off silencer cap
1
and O-ring
2
.
–
Pull glass fiber yarn filling
3
out of the silencer cap.
–
Pull glass fiber yarn filling
4
from the inner tube.
–
Clean the parts that need to be reinstalled and check for
damage.
–
Mount new glass fiber yarn filling
4
on the inner tube.
–
Position new glass fiber yarn filling
3
in the silencer cap.
–
Insert O-ring and silencer cap into outer tube
5
.
–
Mount all screws on the silencer cap and tighten.
Guideline
Screws on main
silencer M5 7 Nm (5.2 lbf ft)
Finishing work
–
Install the silencer. ( p. 69)
11.30 Removing the right side cover
Preparatory work
–
Remove the air filter box cover. ( p. 66)
–
Remove the seat. ( p. 65)
K01112-10
Main work
–
Detach side cover in area
A
, pull off sideways in area
B
and take off toward the rear.