- Check clutch throw-out
0
for damage and wear.
If there is damage or wear:
- Change the clutch push rod.
- Check axial bearing � for damage and wear.
If there is damage or wear:
- Change the axial bearing.
- Place the clutch push rod
(D
on a flat surface and check for run-out.
If there is run-out:
- Change the clutch push rod.
- Check the length of clutch springs Ci).
R00004-01
I Clutch spring - length
I �
38.5 mm(� 1.516 in)
If the clutch spring length is shorter than specified:
- Change all clutch springs.
- Check the contact surface of clutch pressure cap
8
for damage and wear.
If there is damage or wear:
- Change the clutch pressure cap.
- Check clutch basket
48
for damage and wear.
If there is damage or wear:
- Change the clutch basket.
- Check needle bearing 41) and collar sleeve
4D
for damage and wear.
If there is damage or wear:
- Change the needle bearing and collar sleeve.
- Check intermediate clutch discs
48
and G'i) for damage and wear.
If the intermediate clutch discs are not level and are pitted:
- Change all intermediate clutch discs.
- Check clutch facing discs G!) for discoloration and scoring.
If there is discoloration or scoring:
- Change all clutch facing discs.
- Check the thickness of clutch facing discs G!).
CLUTCH 18
251
