17 ENGINE
17.4.33 Checking the clutch
•-
-•
-
Check clutch throw-out
O
for damage and wear.
If
there is damage or wear:
-
Change the clutch push rod.
-
Check axial bearing
8
for damage and wear.
If
there is damage or wear:
-
Change the axial bearing.
-
Place the clutch push rod
(D
on a flat surface and check for run-out.
If
there is run-out:
-
Change the clutch push rod.
-
Check the length of clutch springs
C,.
310351-10
I
Clutch spring - length
I�
38.5 mm(� 1.516 in)
If
the clutch spring length is shorter than specified:
-
Change all clutch springs.
-
Check the contact surface of clutch pressure cap
0
for damage and wear.
If
there is damage or wear:
-
Change the clutch pressure cap.
-
Check clutch basket
(D
for damage and wear.
If
there is damage or wear:
-
Change the clutch basket.
-
Check needle bearing @ and collar sleeve
C)
for damage and wear.
If
there is damage or wear:
-
Change the needle bearing and collar sleeve.
-
Check intermediate clutch discs
@)
and
«D
for damage and wear.
If
the intermediate clutch discs are not level and are pitted:
-
Change all intermediate clutch discs.
-
Check clutch facing discs � for discoloration and scoring.
218
If
there is discoloration or scoring:
-
Change all clutch facing discs.
