Husqvarna F1303V1, Owner'S Manual

Page: 98 / 140

15 ELECTRICAL SYSTEM
96
F03804-10
Main work
–
Open fuse box cover
1
.
–
Remove the faulty fuse.
Guideline
Fuse 1 - not assigned
Fuse 2 - 10 A - combination instrument, fuel pump
Fuse 3 - 10 A - power relay
Fuse
4
- 15 A - ignition coil, start auxiliary relay, horn
Fuse 5 - 15 A - radiator fan
Fuse 6 - 15 A - brake light, turn signal, high beam, low
beam, position light, tail light, license plate lamp
Fuse
7 - 10 A - ABS control unit, combination instrument,
diagnostics connector
Fuse
8
- 10 A - emergency off
Fuse 9 - 10 A - permanent positive for auxiliary equipment
(ACC1 front)
Fuse
10 - 10 A - ignition positive for auxiliary equipment
(ACC2 front, ACC2 rear)
Fuse
SPARE - 10 A/15 A/30 A - spare fuses
Info
A faulty fuse has a burned-out fuse wire
A
.
Warning
Fire hazard Incorrect fuses overload the electrical
system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert the spare fuse with the correct rating.
Fuse (75011088010) ( p. 122)
Fuse (75011088015) ( p. 122)
Fuse (75011088030) ( p. 122)
Tip
Put a spare fuse in the fuse box so that it is available if
needed.
–
Check the function of the electrical power consumer.
–
Close the fuse box cover
1
.
Finishing work
–
Mount the seat. ( p. 55)