Husqvarna DE 110, Operator'S Manual

Page: 21 / 96

Error
code
Error Description Probable cause(s) Action(s)
4
High supply volt-
age.
Product shuts down/does not
start.
+ Warning diode light on HMI.
Too high voltage in grid/power
supply.
Make sure correct
grid/power supply is
used.
Wrong battery used. Use correct battery.
5
Main Pressure
Sensor Error.
Prefilter light flashes red.
Vacuum hose is disconnected
or blocked.
Speak to an ap-
proved service agent.
Control unit is damaged.
6
PCBA tempera-
ture too high.
Product shuts down/ does not
start.
+ Warning diode light on HMI.
Too high ambient temperature.
Do not use the prod-
uct outside specified
temperature range.
7 Fan malfunction.
Product shuts down/ does not
start.
+ Warning diode light on HMI.
Fan is damaged or disconnec-
ted.
Speak to an ap-
proved service agent.
Control unit is damaged.
9
One wire com-
munication not
detected.
Product shuts down/ does not
start.
+ Warning diode light on HMI.
Cable disconnected or dam-
aged.
Speak to an ap-
proved service agent.
Transportation, storage and disposal
To move the product short distances
Make sure that the intake valve is closed. Make sure
that the dust caps are on the hoses.
1. Put the product down on the ground. (Fig. 31)
2. Lift the product manually. (Fig. 32)
3. If 2 persons lift the product, make sure to use the 2
lifting points. (Fig. 33)
To move the product long distances
Make sure to use a closed vehicle during transportation
of the product.
Make sure that the intake valve is closed. Make sure
that the dust caps are on the hoses.
1. Make sure that the Longopac is installed on the
product.
2. Make sure that the Longopac bag is empty.
3. Attach the power cord, the dust extraction hose and
the handle pipe tightly to the product. (Fig. 34)
4. Lock the transport wheels. (Fig. 10)
5. Lift the product, refer to
To lift the product on page
21 .
6. Attach the product safely to the transportation
vehicle to prevent damage and accidents. Use the
tie-down points. (Fig. 35)
To lift the product
WARNING:
Make sure that the lifting
equipment and the lifting straps have the
correct specification to lift the product safely.
The type plate on the product shows the
product weight, refer to Type plate on page
9
.
WARNING:
Get aid if you are not sure
about how to lift heavy equipment.
WARNING:
Do not lift the product with
dust in the tank or in the bag. Do not lift
the product with added weight in or on the
product.
1. Do the filter purge procedure before you lift the
product. Refer to To remove dust particles from the
prefilter during operation on page 15
.
1587 - 007 - 24.01.2022 21