Husqvarna DC 6000, Operator'S Manual

Page: 87 / 104

6. Make sure that the cyclone is not clogged.
Filter change
WARNING:
Use personal safety
equipment, refer to Personal protective
equipment on page 80
, during filter change.
Dust can come out during filter change.
WARNING:
Always turn the motor
switch in the Off position and disconnect the
cord from the wall outlet during filter change.
WARNING:
Be careful, the toggle
fasteners can cause damage to the operator
when assemble the product.
To clean the compressor filter
Note:
Water drop from the compressed air dryer when
you operate the product.
1. Turn the ON/OFF switch to the OFF position.
2. Wait for 30 seconds.
3. Open the compressor filter cover (A).
4. Clean the compressor filter. Replace the compressor
filter if it is clogged.
To clean the filter for the compressed air dryer
Note:
Water drop from the compressed air dryer when
you operate the product.
1883 - 001 - 01.06.2022 87