Husqvarna CT 36, Operator'S Manual

Page: 29 / 652

Contents
Introduction................................................................... 29
Safety............................................................................30
Assembly...................................................................... 35
Operation...................................................................... 35
Maintenance................................................................. 37 Troubleshooting............................................................ 40
Transportation, storage and disposal........................... 42
Technical data.............................................................. 44
Accessories.................................................................. 47
Declaration of Conformity............................................. 48
Introduction
California Proposition 65
WARNING!
The engine exhaust from this
product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.
Product description
This product is a pedestrian-controlled trowel, which is
a concrete smoothing machine. It uses gasoline as fuel
and has a 4-stroke combustion engine.
The product can be used with the optional accessory
floating disc.
Intended use
The product is for professional operation only. The
product is used for floating and burnishing curing
concrete before final step. The product must only be
used outdoors or in areas with sufficient airflow. Do not
use the product for other tasks.
Product overview
(Fig. 1)
Note:
There are 4 different combinations of handle
and blade pitch control: T, ADJ-T, ADJ-P and FOLD-
ADJ-T. Refer to
Technical data on page 44
for
information about handle and blade pitch control on your
product.
1. Throttle control
2. Stop button for the engine
3. Blade pitch knob (T models)
4. Handle
5. Lever for handle height adjustment (ADJ models)
6. Pro-Shift
® lever for blade pitch adjustment (P
models)
7. Belt cover
8. Locking knob for the handle (FOLD models)
9. Handle holder
10. Protection ring
11. Blade
12. Type plate (CE)
13. Type plate (North America)
14. Lifting point
15. Engine ON/OFF switch
16. Oil drain hose
17. Oil tank cap and dipstick
18. Starter rope handle
19. Air filter cover
20. Spark plug
21. Muffler
22. Fuel tank
23. Fuel tank cap
24. Operator's manual
Symbols on the product
(Fig. 4) WARNING! This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
(Fig. 5)
Read the manual carefully and make
sure that you understand the instructions
before you use the product.
(Fig. 6)
Read the manual carefully and make
sure that you understand the instructions
before you use the product.
(Fig. 7)
Use hearing protection and eye
protection.
(Fig. 8) Keep sparks and flames away from the
product. Risk of fire.
(Fig. 9)
Lifting point.
1452 - 002 - 20.05.2022 29