Husqvarna 966503401 Operator'S Manual Download | Manualshive

Page: 19 / 60

background image

19

CoNTRolS

Parking Brake

8058-092

Parking brake released

IMPORTANT INFORMATION

The machine must stand absolutely still when
applying the parking brake. Always set the
parking brake before dismounting. Release the
parking brake before moving the mower.

Blade Switch

To engage the mower deck, pull the knob out; the
mower blades are disengaged when the knob is
depressed.

Throttle Control

The throttle control regulates the engine speed and
thereby the rate of rotation of the blades, assuming
the blade switch is pulled out, see Engaging the
mower Deck.
To increase or decrease the engine speed, the control
is moved forward or back respectively.
Avoid idling the engine for long periods, as there is a
risk of fouling the spark plugs.
USE fUll THRoTTlE WHEN moWING, for best
mower performance and battery charging.

The parking brake is found on the left of the machine.
Push the release button and pull the lever backward
to activate the brake—push forward to release it.

8058-095

Blade switch

8055-095

Throttle control

«
...
17
18
19
20
21
...
»

Summary of Contents for 966503401





























































Reviews:

No comments

Related manuals for 966503401

Brand: Yard force Pages: 45

Brand: Vari Pages: 42

Brand: SANLI Pages: 16

Brand: Gravely Pages: 52

Brand: Yard-Man Pages: 42

Brand: Simplicity Pages: 14

Super Recycler 20062

Brand: Toro Pages: 20

Brand: Baroness Pages: 172

Brand: Bad Boy Pages: 36

Brand: Yazoo/Kees Pages: 84

Brand: Weed Eater Pages: 30

Brand: McCulloch Pages: 60

Brand: Simplicity Pages: 80

Brand: Husqvarna Pages: 24

Brand: Okay Pages: 36

Brand: Gravely Pages: 8

Brand: Bushranger Pages: 24

Brand: Bushranger Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands