38 – English
TECHNICAL DATA
Recommended cutting equipment for Canada
The following is a list of recommended cutting equipment for Chainsaws Husqvarna 555, 560XP, 560XPG, 562XP and
562XPG. The combinations of powerhead, bar and chain meet all requirements outlined in the CSA Z62.1-03 Chainsaws
and Z62.1-04 Chainsaw Kickback standards.
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy.
A hard nose bar having the same length and nose radius as a sprocket-nose bar may be considered to have equivalent
or less kickback energy than the sprocket-nose bar.
We recommend that you as replacement use the listed bars and chains or ”Type C Low-Kickback Saw Chains” which
are available at your dealer.
The following cutting attachments are approved for the models Husqvarna 555, 560XP and 560XPG.
The following cutting attachments are approved for the models Husqvarna 562XP and 562XPG.
Bar
Chain
Length, inch
Pitch, inch
Gauge, inch
Max. nose
radius
Type
Drive link
count
13
0,325
0,058
10T
Husqvarna H25
56
15
12T
64
16
66
18
72
20
78
15
3/8
11T
Husqvarna H42,
Husqvarna H48
56
16
60
18
68
20
72
24
84
Bar
Chain
Length, inch
Pitch, inch
Gauge, inch
Max. nose
radius
Type
Drive link
count
16
3/8
0,058
11T
Husqvarna H42,
Husqvarna H48
60
18
68
20
72
24
84
28
92
