Husqvarna 531RS, Operator'S Manual

Page: 12 / 196

10. Connect the stop switch wires (H) with the
connectors from the engine.
H
11. Install the dust cover (J).
J
12. Install the air filter cover.
To install blades and trimmer heads
WARNING: Only use the approved guard for
the blades. See
Accessories on page 24
. A
defective guard can cause injury.
WARNING: If you operate the product with a
grass blade, first install the correct
handlebar, blade guard and harness .
WARNING: If you do not install the the
blades correctly, it can cause injury.
1. Make sure that the lifted section on the drive disc/
support flange engages correctly in the center hole
of the blades.
2. Install the blades.
To attach and remove the guard extension
The guard extension is used on the cutting attachment
guard. Attach the guard extension when you use a
trimmer head or plastic blades. Remove the extension
guard when you use a grass blade.
• Put the guide on the guard extension into the slot on
the cutting attachment guard. Lock the 4 locking
hooks into position.
• Release the locking hooks with a screwdriver to
remove the guard extension.
To attach a blade guard, grass blade and
grass cutter
CAUTION: Make sure that the guard
extension is removed.
Note: Use the recommended blade guard. Refer to
Accessories on page 24 .
12 1274 - 002 -