40 –
Canadian
TECHNICAL DATA
RECOMMENDED CUTTING EQUIPMENT FOR CANADA
The following is a list of recommended cutting equipment for Class 1A and 1B Chainsaws. The combinations of powerhead, bar
and chain meet all requirements outlined in the CSA Z62.1-03 Chainsaws and Z62.3-96 Chainsaw Kickback standards.
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the corresponding
maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list. For guide
bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of sprocket teeth may be
considered to have equivalent kickback energy.
A hard nose bar having the same length and nose radius as a sprocket-nose bar may be considered to have equivalent or less
kickback energy than the sprocket-nose bar.
We recommend that you as replacement use the listed bars and chains or ”Type C Low-Kickback Saw Chains” which are available
at your dealer.
Saw chain
fi
ling and
fi
le gauges
Bar
Chain
Length, inches
Pitch, inch Gauge, inch Max. nose radius
Type
Drive link count
16
3/8
0,058
11T
Husqvarna H42,
Husqvarna H48
60
18
3/8
0,058
68
20
3/8
0,058
72
24
3/8
0,058
84
28
3/8
0,058
92
16
3/8
0,050
Husqvarna H46,
Husqvarna H47
60
18
3/8
0,050
68
20
3/8
0,050
72
24
3/8
0,050
84
28
3/8
0,050
93
