Fuel System
10
Fuel Pump
Disassembly
Remove screw (l). Remove fuel pump cover
(2), gasket (3) and diaphragm (4).
NOTE:
The internal passages of the carbure-
tor body are delicate and are easily damaged if
proper service procedures are not used.
Damage to the fuel passages and seats is not
repairable and will necessitate the installation
of a new carburetor. Make sure the work area
is clean and exercise extreme care during
disassembly, cleaning and reassembly of the
carburetor.
Drill a small hole in welch plug (1) and cup plug
(2). Place a screwdriver in hole and pry out
plugs. Remove fuel screen (3). Remove adjust-
ing needles and springs (4). Clean carburetor
housing and parts in suitable solvent and dry
with low pressure air.
—
Assembly
Install new fuel screen (3). Tap new welch plug
(1) and cup plug (2) into place. Seal plugs with
nail polish. Install springs and adjusting
needles (4).
39
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
