3. Push the air purge bulb until the bulb starts to fill with
fuel.
4. Hold the body of the product on the ground with your
left hand. Do not put your feet on the product.
5. Pull the starter rope handle slowly until you feel
some resistance, then pull the starter rope handle
with force.
WARNING: Do not wind the starter rope
around your hand.
6. Continue to pull the starter rope handle until the
engine starts.
CAUTION: Do not pull the starter rope
until it stops. Do not let go of the starter
rope when it is fully extended. Release
the starter rope slowly. Risk of damage
to the product.
7. When the engine starts, put the choke control in the
run position and apply full throttle. The throttle trigger
automatically disengages from the start position.
8. Make sure that the engine runs smoothly.
WARNING: Keep body parts away from the
spark plug cap to prevent burn injuries. Risk
of burn injuries. Do not use the product with
a damaged spark plug cap. Risk of electrical
shock.
To stop the product
1. Turn off the ignition to stop the engine.
CAUTION: The stop switch automatically
returns to the start position. In order to
prevent unintentional starting, the spark
plug cap must be removed from the
spark plug when assembling, checking
and/or performing maintenance.
Maintenance
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.
1261 - 001 - 19.09.2019
11
