Husqvarna 2011 SMS 125, Workshop Manual

Page: 36 / 244

D.10
H02646
1
MIN
H02701
SETTINGS AND ADJUSTMENTS
Ed. 05-2011
Front brake fluid level check
The level of the fluid in master cylinder reservoir must never be below the
minimum value, which can be checked from the sight glass (1) on the side of
master cylinder body.
A decrease of the fluid level will let air into the system, hence an extension of
the lever stroke.
If the brake lever feels mushy when pulled, there may be air in the
brake lines or the brake may be defective.
Check the system or proceed to drainage as outlined in the relevant
paragraph.
Do not spill brake fluid onto any painted surface or light lens.
Do not mix two brands of fluid. Completely change the brake fluid
in the brake system if you wish to switch to another fluid brand.
Brake fluid may cause irritation. Avoid contact with skin or eyes.
In case of contact, flush thoroughly with water and call a doctor if
your eyes were exposed.