Husqvarna 2009 HUV 4214 User Manual Download Page 18 | Manualshive

Page: 18 / 57

background image

Controls and Indicators

5

797

Figure 6

Park Brake Handle

PARK BRAKE WARNING LIGHT

The park brake warning light (10) is located on the instrument panel just to the left of the steering column

(Figure

5)

. The warning light indicates that the park brake has been engaged. The vehicle should never be driven with the

park brake engaged. If the warning light remains on after the park brake has been fully disengaged, have a trained
technician check the vehicle.

FRONT AXLE CONTROL

The front drive unit engagement lever (3) is located on the right side of the instrument panel

(Figure 5)

. The handle has

two positions marked 4X4 and 4X2. Push the handle up to engage the front wheel drive unit or push the handle down
to disengage the unit. The engagement lever was designed to be shifted while the vehicle is in motion so momentum is
not lost while operating on slippery terrain. The lever should also be disengaged while the vehicle is in motion.

WARNING

• Do not operate the vehicle on improved surfaces (concrete, asphalt, etc.) in “4X4” mode. Doing so

increases steering effort, tire wear, and shifting effort.

DIFFERENTIAL LOCK CONTROL

The rear differential lock control handle (4) is located on the right side of the instrument panel

(Figure 5)

. The handle

has two positions marked DIFF with a locked padlock icon and DIFF with an unlocked padlock icon. Push the handle
up to engage the differential lock or pull the handle down to disengage the differential lock.

Page 16

2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner’s Manual

«
...
16
17
18
19
20
...
»

Summary of Contents for 2009 HUV 4214


























































Reviews:

No comments

Related manuals for 2009 HUV 4214

Brand: Landoll Pages: 86

Brand: TrailMaster Pages: 13

Brand: Landoll Pages: 76

LEXION 770 2016

Brand: Claas Pages: 48

Brand: Husqvarna Pages: 64

Brand: Husqvarna Pages: 46

2008 HUV 4213-G

Brand: Husqvarna Pages: 52

Brand: Husqvarna Pages: 56

Brand: Husqvarna Pages: 60

Brand: Husqvarna Pages: 68

2007 HUV 4421-D

Brand: Husqvarna Pages: 64

FourTrax Foreman TRX500FE2 2018

Brand: Honda Pages: 279

Brand: Honda Pages: 229

Brand: Honda Pages: 159

Brand: Honda Pages: 71

Brand: Buffalo Tools Pages: 2

Brand: Polaris Pages: 109

Brand: PROALL Pages: 59

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands