English---10
577387001 Rev. 2 1/6/11
ASSEMBLY
B
NOTE:
Make sure unit is assembled cor-
rectly as shown in this manual.
Fitting the J-handle
S
Clip the loop handle onto the shaft.
Note that the loop handle must be fitted
between the arrows on the shaft.
S
Slide the spacer into the slot in the loop
handle.
S
Fit the nut, knob and screw. Do not over-
tighten.
S
Attach the J--handle to the loop handle
using the three screws as shown.
S
Make a final adjustment of the handle to a
comfortable working position. Tighten the
bolt/knob.
ENGINE
S
Align the tab of the attachment (A) with
the arrow on the coupling (B).
S
Push the attachment into the coupling until
the attachment snaps into place.
S
Before using the unit, tighten the knob se-
curely.
Assembling and dismantling
the two--piece shaft
Assembly:
S
Loosen the coupling by turning the knob.
A
Dismantling:
S
Loosen the coupling by turning the knob
(at least three times).
S
Push and hold the button (C). While
securely holding the engine end, pull the
attachment straight out of the coupling.
C
WARNING:
Only grass blades/
grass cutters or trimmer heads/plastic
blades may be used when the
J--handle is fitted. Saw blades must
never be used with the J--handle.
Summary of Contents for 128DJX
