background image

• Clean up afterwards. Make

sure that you have not blown

rubbish into someone's

garden.

• Do not run with the product.
• The powerful currents of air

can move objects at such a

speed that they can bounce

back and cause serious eye

injuries.

• Do not direct the airflow

towards people or animals.

• Stop the motor before you

assemble or dismantle

accessories or other parts.

• Keep all parts of your body

away from hot surfaces.

• Never put the product down

when it is activated unless

you have it in clear sight.

• The blower must not be used

while on a ladder or

scaffolding.

• Do not use the product unless

you are able to call for help in

case of an accident.

• Watch out for thrown objects.

Stones, rubbish, etc., can be

thrown up into the eyes

causing blindness or serious

injury.

• Use a residual-current device

(RCI) for increased security

when you charge the product.

A residual-current device is

fitted to protect operators in

case an electrical fault should

occur.

• This product is renowned for

its low vibration load.

Overexposure to vibration can

lead to circulatory damage or

nerve damage in people who

have impaired circulation.

Contact your doctor if you

experience symptoms of

overexposure to vibration.

8

1310 - 003 - 23.12.2019

Summary of Contents for 120iB

























Reviews: