Husqvarna Viking Huskystar EM10, User Manual, Page: 36 / 48

34
E-1
E-2
E-3
User’s Guide
34
Fig. E-1 alerts you that the
current design loaded in
Navigator has not
fi nished
embroidering. Make sure you
want to erase it and load a new
design.
Fig. E-2 alerts you that all
designs will be erased from the
internal memory of the machine.
This message is displayed after
the
Clear Memory button is
clicked in the Navigator section
of the software.
Fig. E-3 is displayed when the
Move to Stitch function is used.
E22 Design too wide
E23 Design too tall
E25 -X limit reached
E26 +X limit reached
E27 -Y limit reached
E28 +Y limit reached
E40 Main motor stalled
E41 At beginning of design
E42 At end of design
E43 At
fi rst Color Change
E44 At last Color Change
E50 Bad pattern selection
In the event that
a help message
does not clear,
restart your
machine by
turning it off and
then on.