16
T-1
T-2
T-3
User’s Guide
16
Top Tension
1. The tension adjustment for the
top tension is the numbered
dial located at the top of the
machine. The normal range
is marked with a darker
section behind the numbers.
When embroidering the top
thread should be pulled to the
underside of the fabric.
(Fig. T-
1)
.
2. In Fig. T-2, there is too much
top thread pulled to the
underside. Adjust by tightening
the top thread tension. Move
the dial to a higher number.
3. In Fig. T-3, there is too little top
thread pulled to the underside.
Adjust by loosening the top
thread. Move the dial to a lower
number.
If these adjustments fail to
produce a proper tension
balance, contact an authorized
service center.
Summary of Contents for Huskystar EM10
Page 1: ...EM10 USER S GUIDE ...
Page 10: ...8 User s Guide ...
Page 27: ...CONNECTIVITY TO YOUR COMPUTER ...
