Husqvarna Viking Huskylock s21, User Manual

Page: 23 / 48

2 – THREAD YOUR HUSKYLOCK™
S
21 21
Thread Middle Coverstitch /
Chainstitch Needle (red)
'RQWKHQHHGOHFODPS
• Raise the presser foot to release tension discs.
• Pass the thread from back to front through the thread
JXLGHRQWKHWKUHDGVWDQG
• Thread the top cover thread guide by pulling the thread
towards the right until it slips under the guide. Then pull
the thread along the right side of the button as illustrated
• While holding the thread with both hands, pass it
between the tension discs and pull it down to make
FHUWDLQLWLVSURSHUO\SODFHGEHWZHHQWKHWHQVLRQGLVFV
&RQWLQXHWRWKUHDGSRLQWV
•
6OLSWKHWKUHDGLQWRWKHPLGGOHVORWRQWKHWKUHDGJXLGH
DQGLQWRWKHVORWRQWDNHXSOHYHUFRYHU7KHQVOLS
WKHWKUHDGLQWRWKHPLGGOHVORWRQWKHWKUHDGJXLGHV
DQG
• Before threading the eye of the needle, make sure thread
is in front of the thread guide located on the bottom of
WKHQHHGOHFODPS
• Thread the eye of the left needle. Use the needle threader
SDJHWRPDNHWKHWKUHDGLQJHDVLHU
•
3XOODERXWFPRI WKUHDGWKURXJKQHHGOHH\HWR
hang free.
• Place the thread to the back, under the presser foot.
2
6
7
8
9
5
4
1
2
3