Husqvarna Viking Huskylock s21, User Manual

Page: 12 / 48

10
CHANGE PRESSER FOOT
7XUQRII WKHPDLQSRZHUVZLWFKDQGXQSOXJWKHPDFKLQH
1. Raise the presser foot.
2. Turn the hand wheel toward you until the needles are at
the highest position.
3. Push the red button on the back of the presser foot
ankle to release the presser foot.
4. Raise the presser foot to the extra lift position and the
foot will come off.
5. Place the new foot with the pin right underneath the
groove of the ankle while in the extra lift position.
Lower the presser foot. Push the red button on the back
of the presser foot ankle and the foot will snap into
place.
MOVABLE UPPER CUTTER
Disengage the Movable Upper Cutter
(Position C)
7XUQRII WKHPDLQSRZHUVZLWFKDQGXQSOXJWKHPDFKLQH
• Turn the handwheel toward you until the upper cutter is
raised to the highest position.
• Open the front cover.
• Pull the movable cutter knob to the right as far as it will
JR
•
7XUQWKHNQREWRZDUG\RXFRXQWHUFORFNZLVHXQWLOWKH
cutter clicks into the locked position C.
Engage the Movable Upper Cutter
(Position S)
7XUQRII WKHPDLQSRZHUVZLWFKDQGXQSOXJWKHPDFKLQH
• Open the front cover and pull the movable cutter knob
WRWKHULJKWDVIDUDVLWZLOOJR
•
7XUQWKHNQREFORFNZLVHXQWLOWKHFXWWHUFOLFNVLQWR
WKHFXWWLQJSRVLWLRQ6
B
S
C
B
S
1
2
1
2