Husqvarna Viking GT2254 Owner'S Manual Download

Page: 11 / 52

OPERATION

02825_LSW

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR.

Compare the illustrations with your tractor to familiarize yourself with the location of various controls and adjustments.
Save this man ual for future reference.

FIG. 7

THROTTLE
CONTROL

CHOKE
CONTROL

AMMETER -

Indocates charging (+) or discharging (-) of

battery.

ATTACHMENT CLUTCH SWITCH

Used to engage mow er

blades or other attachments mounted to your trac tor.

CHOKE CONTROL

- Used when starting a cold engine.

CLUTCH/BRAKE PEDAL

- Used for declutching and brak-

ing the tractor and starting the engine.

GEARSHIFT LEVER

- Selects the speed and direction

of tractor.

HEIGHT ADJUSTMENT KNOB

- Used to adjust the mow er

height.

IGNITION SWITCH

- Used to start and stop the engine.

LIFT LEVER

- Used to raise and lower mower deck or

other attachments mounted to your tractor.

LIFT LEVER PLUNGER

- Used to release attachment lift

lever when changing its position.

LIGHT SWITCH

- Turns the headlights on and off.

PARKING BRAKE LEVER

- Locks brake pedal into the

brake position.

RANGE SHIFT LEVER

- Allows high (H) or low (L) speed

for all forward and reverse gears.

REVERSE OPERATION SYSTEM (ROS) “ON” POSI-
TION -

Allows operation of mower deck or other powered

attachment while in reverse.

THROTTLE CONTROL

Used to control engine speed.

Our tractors conform to the safety standards of the American National Standards Institute.

GEAR SHIFT LEVER

PARKING BRAKE LEVER

HEIGHT
ADJUSTMENT
KNOB

IGNITION SWITCH

CLUTCH /BRAKE
PEDAL

LIFT LEVER

ATTACHMENT
CLUTCH
SWITCH

LIFT LEVER
PLUNGER

ROS "ON" POSITION

AMMETER

LIGHT SWITCH

RANGE SHIFT
LEVER

Summary of Contents for GT2254





















































Search results

Summary of Contents for GT2254

Reviews:

Related manuals for GT2254

Brands by name

Popular brands

Husqvarna Viking GT2254, Owner'S Manual

Search results

Summary of Contents for GT2254

Reviews:

Related manuals for GT2254

Brands by name

Popular brands