Operating the machine – 23
Add Stitches or Letters at other Positions
If you wish to add a stitch or letter at another position in the program, move the cursor by pressing the arrow buttons.
The stitch or letter will be inserted to the right of the cursor.
Note: When programming letters, press the arrow down button to activate the cursor in the stitch program instead of in the alphabet.
Add the Same Stitch Several Times
If you want to add the same stitch several times in a row you can just press the OK button directly after the fi rst stitch has
been inserted. The same stitch will be inserted each time you press OK.
You can also move the cursor to select another stitch and press the OK button. The selected stitch will be inserted once
more to the right of the selected stitch.
Delete Stitches or Letters
To delete a stitch in the program, select the stitch with the cursor by pressing the arrow buttons and press the Clear (CLR)
button.
To delete the whole program, move the cursor to the left of the fi rst position and press the Clear (CLR) button. A pop-up
will appear asking you to verify the deletion. Select Yes or No with the arrow buttons and press OK.
Add commands
Adjust a single stitch or letter
Add Commands
The commands FIX and STOP can be added to the program. Each
command takes one memory space in the program.
Note: If autofi x is activated on your machine you do not need to add a FIX in the
beginning of the program.
Join Two Stitch Programs Into One
You can add a previously saved program to a new one in Programming
Mode. Press the Stitch Menu button, select My Stitches and the
program you wish to add. Press OK and the program will be inserted in
Programming Mode to the right of the cursor.
Adjust a Single Stitch or Letter
To adjust the settings of a single stitch in a program you must select the
stitch in Programming Mode. You can adjust the stitch width, stitch length,
density, or needle position or mirror the stitch. The settings for the selected
stitch are shown on the GraphicDisplay. Press the Alternate View button to
toggle between different settings.
Adjust the Entire Stitch Program
Adjustments that affect the whole program and not just single stitches,
are done in Sewing Mode. Press the PROG button to leave Programming
Mode and switch to Sewing Mode. In Sewing Mode you can adjust the
width and length or mirror the whole program.
There are a few things you need to know when adjusting the stitch program
in Sewing Mode:
The adjustments you make to the program in Sewing Mode can be saved
to My Stitches. However, these adjustments cannot be brought back to
Programming Mode. If you have made adjustments in Sewing Mode
and press the PROG button to go back to Programming Mode, these
adjustments will be cancelled. This will also happen if you load a saved
program from My Stitches to Programming Mode.
