Husky XS E159503 Recommended Installation, Maintenance And Inspection Instructions Download Page 2

CAUTION: DO NOT TOP OFF!

Topping off can lead to spills and splashes.

ALWAYS ADHERE TO INSTALLATION / USAGE INSTRUCTIONS AND WARNINGS.

 

Improper use may result in injury, damage, or hazardous spill.

WARRANTY

VAPOR PRODUCTS

  –  Husky  Corporation  will,  at  its  option,  repair,  replace,  or  credit  the  purchase  price  of  any  Husky

®

  

manufactured product which proves upon examination by Husky, to be defective in material and/or workmanship for a period of one (1) 
year of installation or fifteen (15) months from the manufacture date of shipment by Husky, whichever occurs first. The warranty period on 
repaired or replacement vapor recovery products is only for the remainder of the warranty period of the defective product. 

CONVENTIONAL PRODUCTS 

– Husky Corporation will, at its option, repair, replace, or credit the purchase price of any Husky 

manufactured product which proves upon examination by Husky, to be defective in material and/or workmanship for a period of one (1) 
year from the manufacture date of shipment by Husky. 

Buyer  must  return  the  products  to  Husky,  transportation  charges  prepaid.  This  Warranty  excludes  the  replaceable  bellows, 

 

bellows spring assembly, spout assembly and scuff guard, unless (i) damage is obvious when the product is removed from shipping carton 
and (ii) the defective product is returned to Husky prior to use. This warranty does not apply to equipment or parts which have been installed 
improperly, damaged by misuse, improper operation or maintenance, or which are altered or repaired in any way.

The  warranty  provisions  contained  herein  apply  only  to  original  purchasers  who  use  the  equipment  for  commercial  or 

 

industrial purposes. There are no other warranties of merchantability, fitness for a particular purpose, or otherwise, and any other such 
warranties are hereby specifically disclaimed.

Husky assumes no liability for labor charges or other costs incurred by Buyer incidental to the service, adjustment, repair, return, 

removal or replacement of products. Husky assumes no liability for any incidental, consequential, or other damages under any warranty, 
express or implied, and all such liability is hereby expressly excluded.

Husky  reserves  the  right  to  change  or  improve  the  design  of  any  Husky  fuel  dispensing  equipment  without  assuming  any 

 

obligations to modify any fuel dispensing equipment previously manufactured.

•  Use of equipment is at individuals’ own risk.
•  Always abide and adhere to city, state, 

and federal regulations regarding use and 
installation of dispensing equipment.

•  Always follow the product manufacturer’s 

installation & maintenance instructions.

•  Always turn off all power to dispenser during 

maintenance and inspection activities.

•  Always close the shear valves during 

maintenance and inspection activities.

•  Always relieve pressure from system prior to 

performing maintenance activities. 

•  Always check continuity after installation 

using a megohmeter (Refer to PEI RP 400 
for details).

•  Always replace or remove from service 

damaged or leaking dispensing equipment 
immediately. 

•  Always report leaks / spills / accidents to 

appropriate authorities.

•  Always wear appropriate safety equipment 

 

during maintenance activities.

•  Always have appropriate fire extinguishing 

equipment within 5 ft / 1.5 m of dispensers.

•  Always use pipe sealant approved for 

 

gasoline service.

•  Always place containers on the ground 

before filling.

•  Always discharge static electricity before 

using or servicing equipment by touching a 
metal part of the dispenser before and after 
fueling vehicle.

•  Never smoke within 20 ft / 6.1 m of 

dispensers.

•  Never keep in service past recommended 

life.

•  Never leave the nozzle unattended while 

dispensing fuel.

•  Never use sparking or flaming devices 

within 20 ft / 6.1 m of dispensers.

•  Never use power tools near dispensers or 

 

to aid in the installation process.

•  Never use cell phone within 20 ft / 6.1 m of 

dispensers.

• Never reenter car when fueling vehicle.
• Never allow gasoline to touch eyes or skin.
•  Never use at flow rates in excess of 

 

regulatory guidelines.

•  Never use at flow rates less than 5 gpm / 

18.9 Lpm.

•  Never dispense flammable material into 

 

unapproved containers.

•  Never dispense fuel without a valid 

 

driver’s license. 

Husky Corporation • 2325 Husky Way • Pacific, MO 63069 • Phone: (800) 325-3558 • Fax: (636) 825-7300 • www.husky.com 

Page 2                                                                            009216-15 10/2019

Important safety instructions - save these instructions in a readily accessible location

GENERAL WARNINGS / INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC 

SHOCK OR INJURY TO PERSON:

Summary of Contents for XS E159503

Page 1: ... Check remove after date Annually Check for electrical conductivity Lubricate main valve stem All drive aways maintenance and inspection activities must be logged using the serial number of the individual product Apply city state or federal testing regulations as appropriate ANY TEST INSPECTION FAILURE REQUIRES IMMEDIATE EQUIPMENT REPLACEMENT OR REMOVAL FROM SERVICE MADE IN THE USA Pressure Activa...

Page 2: ...expressly excluded Husky reserves the right to change or improve the design of any Husky fuel dispensing equipment without assuming any obligations to modify any fuel dispensing equipment previously manufactured Use of equipment is at individuals own risk Always abide and adhere to city state and federal regulations regarding use and installation of dispensing equipment Always follow the product m...

Page 3: ... TROUBLESHOOTING GUIDE GENERAL TECHNICAL DATA Husky Corporation 2325 Husky Way Pacific MO 63069 Phone 800 325 3558 Fax 636 825 7300 www husky com Page 3 009216 15 10 2019 1 Activate dispenser 2 Insert spout into fill pipe opening 3 Lower hose end of nozzle so the spout spring catches the inside of the fill pipe 4 Raise the lever and begin fueling 5 Nozzle will shut off automatically when the tank ...

Page 4: ... cover 2 Snap new handle cover into place WAFFLE SPLASH GUARD Model 001808 1 Remove old waffle splash guard 2 Install new waffle splash guard over spout lock nut POPD CLEAR COVER Model 006628 1 Trim advertisement to 3 75 in 95 25 mm x 3 75 in 95 25 mm 2 Notch corners of advertisement approximately 375 in 9 5 mm x 375 in 9 5 mm 3 Turn clear cover inside out 4 Center advertisement on POPD guard usin...

Reviews: