Husky HU80709A, Operator'S Manual

Page: 8 / 36

4 — English
SPECIFIC SAFETY RULES

Product users on United States Forest Service land,
and in some states, must comply with fire prevention
regulations. This product is not equipped with a spark
arrestor; however, other user requirements may apply.
Check with your federal, state, or local authorities. Be-
fore this engine is operated on any U.S. Forest Service
regulated property, a spark arrestor must be installed.

Never direct a water stream toward people or pets,
or any electrical device.

Before starting any cleaning operation, close doors
and windows. Clear the area to be cleaned of debris,
toys, outdoor furniture, or other objects that could create
a hazard.

Never pick up or carry a machine while the engine is
running.

Never start the machine if ice has formed in any part
of the equipment.

Do not use acids, alkalines, solvents, flammable
material, bleaches, or industrial grade solutions
in this product. These products can cause physical
injuries to the operator and irreversible damage to the
machine.

Always operate the machine on a level surface. If the
engine is on an incline, it could seize due to improper
lubrication (even at the maximum oil level).

WARNING: High pressure jets can be dangerous if
subject to misuse. The jet must not be directed at
persons, animals, electrical devices, or the machine
itself.

Never attempt to make any adjustments while the
engine (motor) is running (except where specifically
recommended by the manufacturer).

Protective covers must always cover rotating parts
when the engine is running.

Keep cooling air intake (recoil starter area) and muffler
side of the engine at least 3 feet away from buildings,
obstructions, and other combustible objects.

Keep the engine away from flammables and other
hazardous materials.

Keep away from hot parts. The muffler and other engine
parts become very hot; use caution.

Do not touch the spark plug and ignition cable when
starting and operating the engine.

Check fuel hoses and joints for looseness and fuel
leakage before each use.

Check bolts and nuts for looseness before each use.
A loose bolt or nut may cause serious engine prob-
lems.

Always refuel outdoors. Never refuel indoors or in a
poorly ventilated area.

Never store the machine with fuel in the fuel tank
inside a building
where ignition sources are present,
such as hot water and space heaters, clothes dryers,
and the like.

I f the fuel tank has to be drained, do this outdoors.

To reduce the risk of fire and burn injury, handle fuel
with care. It is highly flammable.

Do not smoke while handling fuel.

A dd fuel before starting the engine.
Never remove the
cap of the fuel tank or add fuel while the engine is running
or when the engine is hot.

Loosen fuel cap slowly to release pressure and to keep
fuel from escaping around the cap.

Replace all fuel tank and container caps securely.

Wipe spilled fuel from the unit. Move 30 feet away from
refueling site before starting engine.

If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.

Never attempt to burn off spilled fuel under any
circumstances.

Before storing, allow the engine to cool.

Store fuel in a cool, well-ventilated area, safely away
from spark and/or flame-producing equipment.

Store fuel in containers specifically designed for this
purpose.

Empty fuel tank and restrain the unit from moving
before transporting in a vehicle.

When servicing use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.

ONLY use cold water.

Make sure minimum clearance of 3 feet is maintained
from combustible materials.

Never spray close to the surface to be cleaned as you
can damage the surface.

Do not use the spring clip for support of human weight,
playground equipment, or athletic or overhead lifting of a
load. Holds up to 5 lbs.

Save these instructions. Refer to them frequently and
use them to instruct other users. If you loan someone this
tool, loan them these instructions also.