Husky HSK012HD User'S Manual & Warranty Information Download Page 3

1

SAFETY INFORMATION

WARNINGS: 

1. When working with lead-acid batteries, always make sure immediate assistance

is available in case of accident or emergency.

2. Always use protective eyewear when using this product: contact with battery acid

may cause blindness and/or severe burns, be aware of first aid procedures in
case of accidental contact with battery acid.

3. There is a risk of explosive gases being released when lead acid batteries are

being charged or discharged. Failure to follow instructions may cause property
damage, explosive hazard, and/or personal injury.

4. When charging unit from a 120 volt AC electrical outlet in any wet or damp

area, make sure that the outlet used is protected by a ground fault interrupt
(GFI) switch.

5. When charging the unit near water, do not allow the electrical cords and outlets

to get wet or come near water–electrical shock could result.

6

Jump-start procedures should only be performed in a safe, dry, well-ventilated area.

7. Always store battery clamps on clamp holder tab on back of unit when not in

use. Never touch battery clamps together, this can cause dangerous sparks,
power arcing and/ or explosion.

8. When using this unit in proximity to the vehicle’s battery and engine, stand the

unit on a flat, stable surface, and be sure to keep all clamps, cords, clothing
and body parts away from moving vehicle components.

9. Do not wear vinyl clothing when jump-starting a vehicle, friction can cause dan-

gerous static-electricity sparks. Remove all jewelry or metal objects that could
cause short circuits or react with battery acid.

10. Always disconnect the negative (Black) jumper cable first: followed by the pos-

itive (Red) jumper cable, except for positive ground systems.

11. Never allow  red and black clamps to touch each other or another common metal

conductor–this could cause damage to the unit and/or create sparking/ explo-
sion hazard. Always store battery clamps on clamp holder tabs when not in use.

12. Do not expose battery to fire or intense heat as it may explode. Before disposing of

the battery, protect exposed terminals with heavy-duty electrical tape to prevent
shorting (shorting can result in injury or fire).

13. Do not smoke or use inflammable items (matches, cigarette lighters, etc.) while work-

ing on a vehicle’s battery system.

14. Keep unit out of reach of children (whether stored, or in use)!

CAUTIONS: 

1. Use only the supplied cords/adapters for recharging this unit. Do not recharge

for more than 4-5 hours maximum using 12 volt DC method. Recharge unit
after each use.

2. All On/Off switches should be in the OFF position when the unit is charging or

not in use. Make sure all switches are in the OFF position before connection to a
power source or load.

HSK012HD MAN ENGL 090105  9/1/05  5:42 PM  Page 1

Summary of Contents for HSK012HD













Reviews: