12
English
WARNING:
Risk of injury - Do not
direct discharge stream at anyone.
MOTOR OVERLOAD
The electric motor in this pressure washer is equipped
with an overload protection device which will automa-
tically shut off the motor in the event the motor draws
excessive current or overheats.
The device will automatically reset itself and resume
normal operation after a short period of time.
3.0
IMPORTANT SAFETY
INSTRUCTIONS
GROUND-FAULT CIRCUIT-INTERRUPTER PRO-
TECTION
This pressure washer is provided with a ground-fault
circuit-interrupter (GFCI) built into the plug of the power
supply cord. This device provides additional protection
from the risk of electric shock.
If replacement of the plug or cord is needed, use only
identical replacement parts from the manufacturer.
WARNING
WARNING:
When using this product
basic precautions should always be fol-
lowed, including the following:
1. Read all the instructions before using the product.
2. To reduce the risk of injury, do not operate near
children or animals.
3. Be thoroughly familiar with the controls.
4. Stay alert - watch what you are doing.
5. Do not operate the product when fatigued or under
the influence of alcohol or drugs.
6. Keep operating area clear of all persons and ani-
mals.
7. Do not overreach or operate unit on unstable surface.
Keep good footing and balance at all times.
8. Follow the maintenance instructions specified in the
manual.
WARNING
SAVE THESE INSTRUCTIONS
WARNING:
Do not spray electrical
apparatus and wiring.
WARNING:
High pressure. Keep
clear of nozzle.
WARNING:
Keep unit at least 20 ft
(6m) away from explosive vapours.
Arcing parts may cause ignition.
WARNING:
When a combustible
liquid is sprayed, there may be danger
of fire or explosion, especially in a closed
area. Read instruction manual before
operating.
- Injection hazard: equipment can cause serious injury
if the spray penetrates the skin. Do not point the
gun at anyone or any part of the body. In case of
penetration, seek medical aid immediately.
- This system is capable of producing 1500 psi. To
avoid rupture and injury, do not operate this pump
with components rated less than 1500 psi working
pressure (including but not limited to spray guns,
hose, and hose connections).
- Before servicing, cleaning, or removal of any part,
shut off power and relieve pressure.
WARNING
AUTOMATIC TOTAL STOP
®
The pressure washer is equipped with a stop device
which will sense when the trigger on the gun is released.
It will open the power circuit to the motor and cause the
pressure washer to stop.
WARNING
WARNING:
The pressure washer is also
equipped with a main power ON/OFF
switch located on the unit. It should always
be moved to the OFF position when the
pressure washer is not being used to
prevent possible injury or damage.
WARNING
If Automatic Total Stop
®
fails to operate,
DO NOT USE THE MACHINE. Contact our
Customer Service department. Further use
will damage the machine and/or cause
personal injury.
Summary of Contents for HD1500
