H U S k Y D U A L - Z O N E S L I M L I N E W I N E C O O L E R
5
Setting the temperature controller
You can display the temperature in either Fahrenheit or Celsius by pressing
the °F/°C button.
You may change the temperature as you wish by pressing the UP or DOWN
buttons on the control panel. The set temperature will increase by 1ºF or 1ºC
for each depression of the UP button. The temperature will decrease by 1ºF
or 1ºC for each depression of the DOWN button.
NOTE: After you select your desired temperature the display will revert to
show the current temperature inside the cabinet, but it will gradually fall as
it reaches your set temperature.
If you store mostly red wines, the temperature will ideally be set between
14-18ºC (57-65ºF). If you store mostly white wines, the temperature will
ideally be set between 9-14ºC (49-58ºF).
NOTE: When you use the appliance for the first time or restart it after having
been turned off for a long time, there may be a few degrees difference
between the temperature you select and the one indicated on the LCD
readout. This is normal. Once the wine cooler has been running for a few
hours the display will stabilise.
The temperature displayed may deviate from your set temperature. The
internal temperature varies constantly due to the natural cooling cycle,
the door being opened, the introduction of new bottles, or air variations
around the position of the thermostat. This is not a sign of malfunction
or failure of the wine cooler.
Capacity
You may place up to 21 standard-sized 75cl bottles in this wine cooler. As
bottles differ widely in size the actual number of bottles may vary.
Interior light
The interior light may be turned ON or OFF by pushing the “Light” button.
Cleaning
CAUTION: Failure to unplug the Wine Cooler could result in electrical shock or
personal injury.
• Unplug the Wine Cooler, and remove all items including shelves.
• Wipe the inside surfaces with a damp cloth soaked in a solution of
two tablespoons of ordinary baking soda to a litre of water. Do not
use abrasive cleaners.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning area of
the controls, or any electrical parts.
• Wipe the outside cabinet with a solution of warm water and mild
liquid detergent. Rinse well and wipe dry with a clean soft cloth.
