• Do not expose the appliance to direct sunlight or a heat source such
as ovens, radiators, heaters, etc.
• Do not under any circumstances place heated beverages or food in
your Husky Wine Cooler.
• Do not open the door more often than necessary to lessen the
escape of cold air.
• For better air circulation, do not overfill the unit.
• Adjust the temperature regulator according to the amount of product
and the ambient temperature.
HUS-CN215 HANDLE ASSEMBLY INSTRUCTIONS
These instructions are for fitting the handle on your CN215 Wine Cooler.
When opening the box, you can see that the handle is not assembled onto
the wine cooler to avoid damage during transportation. You will see two
screws holes reserved for the fixing of the handle on the door panel.
• Please open the door, take the handle part and screws stored in the
cavity for transportation.
• Carefully remove the magnetic seal and find the opposite end of the
two screw holes.
• Insert the screws until the tip can be seen on the other end on the
front door panel.
• Position the handle in front of the screws. Screw clockwise until
tight.
• Once done, replace the magnetic seal into initial position.
If you require any further assistance please contact customer services on
01455 555397.
BASIC OPERATION
It is recommended you install the Wine Cooler in a place where the
ambient temperature is between 23º-26ºC/72º-78ºF. If the ambient
temperature is outside this range, the performance of the unit may be
affected. Placing your unit in extreme cold or hot conditions may cause
interior temperatures to fluctuate and the range of 7º-18ºC/46º-65ºF
may not be reached.
• Temperature Range For Your Wine Cooler: 7-18°C/44-64°F
• Recommended Temperatures for Chilling Wine
Red wines: 14-18°C/57-65°F
White wines: 9-14°C/49-58°F
Rosé wines: 10-11°C/51-53°F
Sparkling wines: 5-9°C/40-49°F
4
H U S k Y D U A L - Z O N E S L I M L I N E W I N E C O O L E R
Hole 1
Hole 2
Hole 1
Screw 1
Hole 2
Handle
Magnetic Seal
Screw 2
