Huskie Tools REC-660YC, Operation Manual

Page: 5 / 16

www.huskietools.com Page 5 800-860-6170
KIT INCLUDES
The
REC-660YC
works well for most underground aluminum cable cutting applications. It was designed to cut
copper cables up to 500 MCM* and aluminum up to 2” maximum outside diameter. The extra wide jaws make cutting
the larger diameter underground cables easier. The hydraulic system is designed the same as the REC-658U featuring
a rapid advance ram to reduce cycle time.
Because of the larger cutting surface of the blades, the maximum size copper cable that can be cut is 500 MCM*.
Larger cables will simply cause the cutter to bypass, which is a built-in overload safety device to prevent damage to
the tool.
The large jaws can be placed over cables that lie flat on the ground and the cables will be scooped up as the cutting
jaws are closed. All cuts are clean so that there is minimal cable distortion for cable sleeving purposes.
NOTE:
DO NOT CUT STEEL.
• 1 Battery Powered Tool
• 1 Carrying Case
• 1 CH-94 Charger
• 2 BP-84 Lithium Ion Batteries
• 1 Carrying Strap
Battery and Charger
• BP-84 Huskie Tools Lithium Ion Battery
• CH-94 Huskie Tools Charger
• This charger can charge the BP-84, BP-82 and BP-80 only.
Huskie Tools batteries, including the BP-70, BP-70EI
and the BP-70MH must be charged with the CH-90, CH-80, or
previous charger models.