13
Winch working
direction is in
backwards
of
the
switch
assembly.
-Electrical
connections
are in wrong direction in
the valve solenoid.
-Simply exchange the blue and yellow wire
connectors at the solenoid of directional
valve, or change the oil pipe between the
valve and motor.
Winch braking
malfunction.
-Winch working in wrong
direction.
-Brake slice worn or
worn not.
-Change winch working direction looking is to
clockwise look at the motor end
- Simply readjusted the braking angle or
replaces the new brake slice.
WARNING -
Adjustment braking angle method: The spring according to the
spring gyrotropic pre-tight two laps, then shows the spline tooth set according to
following braking cutaway view the adjustment angle for 20°±5°.
