9
OPERATION
WARNING
1 Make sure clutch is totally engaged before starting any winch operation;
2 Stay clear and away from raised loads;
3 Stay clear of cable while pulling do not try to guide cable;
4 A min. of 5 wraps of cable around the drum barrel.
General information:
The Winch’s standard equipments contain gear reducer
、
drum
、
hydraulic motor
、
solenoid valve
、
switch assembly
、
female connector and plumbing fittings. The winch
obtains it
s pressure from the vehicle’s existing power steering pump or other hydraulic
power. The winch is totally sealed, can be used underwater.
For your reference there are several other ways to supply power for winch; the first
way: use an
individual pump for engineering use; the second way: The winch’s
pressure is from the vehicle’s exiting power steering pump as Installation illustration:
①
Use a suitable individual pump which has not oil valve; it supply pressure for both
steering box and winch.
②
: Use a combined pump which integrate an oil valve
together, the oil valve supply two kinds of flow for difference demand, one with
constant flow is for steering use, the other with higher power is for engineering use.
Caution:
Hydraulic system needs an relief valve to make sure the system is safe; If there is not
relief valve in the system; it would be serious danger and the system can
’t operation. If
your winch drived by an existing hydraulic power system, the relief valve is also
existing.
Winch working demonstration:
1. Disengage the clutch by turning the clutch to the
“CLUTCH OUT” position.
2. Grab the cable assembly and pull the cable to the desired length, then attach to
item being pulled.
