www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB | 23
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical
and electronic equipment. Improper handling of
waste equipment may have negative consequences
for the environment and human health due to poten-
tially hazardous substances that are often contained
in electrical and electronic equipment.
By properly disposing of this product, you are also
contributing to the effective use of natural resources.
You can obtain information on collection points for
waste equipment from your municipal administration,
public waste disposal authority, an authorised body
for the disposal of waste electrical and electronic
equipment or your waste disposal company.
• At the end of the season, carry out a general check
of the scarifier, and remove all residue collected.
Before the start of every season, it is absolutely
necessary to check the state of the scarifier.
Contact our Customer Service if repair work is
necessary.
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the
following parts are therefore also required for use as
consumables.
Wear parts*: Aerator roller, Carbon brushes
* Not necessarily included in the scope of delivery!
11. Disposal and recycling
The equipment is supplied in packaging to prevent
it from being damaged in transit. The raw materials
in this packaging can be reused or recycled. The
equipment and its accessories are made of various
types of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
Old devices must not be disposed of with
household waste!
12. Troubleshooting guide
Fault
Possible causes
Rectification
Motor does not start
• No electricity in plug
• Cable defective
• Switch, switch/plug block defective
• Connections to motor or capacitor
disconnected
• Housing clogged
• Check line and fuse
• Have machine checked by a customer ser-
vice center
• Have machine checked by a customer ser-
vice center
• Have machine checked by a customer ser-
vice center
• If necessary adjust working depth. Clean
housing so that the roller can run freely
Engine performance
drops
•
Soil is too firm
• Housing clogged
• Roller badly worn
• Change working depth
• Clean housing
• Replace roller
Imprecise scarifying
result
• roller worn
• Wrong working depth
• Replace roller
• Correct working depth
Motor is running, roller is
not rotating
• Toothed belt is torn
• By customer service workshop
