LED Sea-Vue® Light Instructions
12 & 24 Volt
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS:
This manual contains important
safety and operating instructions for Sea-Vue Underwater LED
lights.
CAREFULLY READ THESE INSTRUCTIONS BEFORE IN-
STALLING OR USING PRODUCT.
GENERAL PRECAUTIONS
Battery posts, terminals and related accessories contain lead and lead com-
ponents, and other chemicals known to the State of California to cause can-
cer and birth defects or other reproductive harm. Always wash your hands
after handling these devices.
Do not operate the Sea-Vue Lights with damaged power cables - Replace
damaged product immediately.
VOLTAGE COMPATIBILITY: NEVER use the Sea-Vue Lights power supply
(if used) unless the input voltage matches the Input voltage rating of the
power supply. For example, do not use a 12-volt power supply with a 24-
volt system.
MOUNTING LOCATIONS: The Sea-Vue Lights LED lights must be
mounted at least 6” below the water line or on a dock as a dock light 6”
below the low tide waterline. If a power supply is used, it should be mounted
in a location with plenty of ventilation that is not likely to experience water
submersion.
Hurley Marine, Inc. • 1125 Lake Shore Drive • Escanaba, MI 49829 USA
906. 553.6249 • www.hurleymarine.com
NOTES
