Inst339 Filtrite Salt Chlorinator V09.20
7
CHLORINE OUTPUT
The Chlorine Output Control area of the user panel has three main functions:
(a)
Increase/Decrease arrows for setting the chlorine output level of the chlorinator. The chlorinator output can be set
from levels 0 through to 8. This level only applies to Pool Mode. When the chlorinator is in Spa mode, the chlorine
output will be at level 1
(b)
Chlorine Output display shows the level set
(c)
The LCD display will also show a output level from 0 to 8 which indicates the performance of the chlorinator
compared to the Chlorine Output LED’s. Should the LCD output level (1 to 8) be less than the LED output, check
salt level in pool. Should salt level be at 4,000 ppm and output more than 2 settings less than LED display, you cell
may need replacing.
USER MODE
The user mode buttons enable you to select Pool or Spa mode and to manually control the Chlorinator/Pump. Functions are
as follows:
(a)
POOL MODE:
Sends a message to other Hurlcon equipment (if fitted) to go to Pool mode. There are 3 Pool
Modes;
Auto
The Chlorinator/Pump will run according to how you have set the timers
On
The Chlorinator/Pump will run continuously.
Standby/Off
The Chlorinator/Pump will stay off continuously.
(b)
SPA MODE:
Sends a message to other Filtrite by Hurlcon equipment (if fitted) to go to Spa mode and turns the
pump on
