EN
5
■
Quick start
1. DISPLAY
The upper display indicates the cabinet temperature sensor readings. The lower display
indicates the penetrative probe temperature or countdown timer value. DOWN button allows
to switch between thermal probes.
- Temperature
- Timer or thermal probe
- Alarm or status indicators
Turning on any indicator or LED
activates the appropriate function.
Flashing indicator or LED signals a
delay in function execution.
2.
USING A KEYBOARD IN STANDBY MODE
Selecting a cycle
Press CYCLE (3) key until the desired cycle is displayed.
Launching a cycle:
press START/STOP (2) key. The corresponding yellow LED will come on.
Pausing a running cycle
1. Press START/STOP (2) key.
2. Compressor and fan will stop for a time defined by PAU parameter (see the list of
parameters), and the display will indicate "Stb" message.
3. To resume a cycle, press START/STOP (2) key; the cycle will resume at the point it was
paused.
4. In any case, the cycle will be resumed automatically on the expiry of PAU time.
Running cycle stopping procedure: press and hold START/STOP (2) key until the yellow LED
goes out.
