HUR PULLEY, User Manual, Page: 14 / 21

13
ver. 1/2017
tional service years for your HUR equipment. Note that ignoring maintenance might void warranty.
For additional user safety and for keeping the product in trouble free condition, always instruct first-
time users of the proper exercise methods and use of equipment.
In case of any problems with your HUR product, please contact HUR service:
service@hur.fi or +358-6-
8325500
When reporting of the trouble the following information is required:

Model and serial number of the product

When the defect was detected

Description of the problem

Your contact information
NOTE!
The serial number can be found on the front side of the device frame in con-
nection with the type plate. Notice that marking on the type plate can vary
depending on device model.
Basic things regarding to occurring problems:
•
In case of air leakage, turn off the compressor immediately to avoid overheating. Overheating can
cause more defects.
• Apart from connecting the tubing, DO NOT try repairing anything before contacting HUR service.
• Always switch off and disconnect any electronic supplies of the defective device.
• Make sure that the defective device is not to be used before it is inspected and repaired properly.
• All the tubing used in HUR machines are of “Quick Connect-type”. To connect, simply push the tube
inside the connector (Picture 1). To remove, push tube slightly in, press the locking ring on the con-
nector and disconnect the tube (Picture 2).
Serial number